One of those sinking feelings in the pit of your stomach will threaten to overwhelm you when you discover that the basement has a problem with water damage. It could be because of a long-undiscovered leak which could have been causing untold damage for a long time, or it could be caused by the creation of an environment that is overly humid.
In either situation you could find yourself sitting on foundations that have become structurally dangerous or there could be mold or other fungus growth taking place, breeding a potential health risk.
The basement may be damp because of moisture soaking through the foundation, it doesn’t necessarily have to have come from a leaking pipe.
The first step to repairing any water damage in the basement is to identify exactly what it is that’s causing the moisture in the first place. A leaking pipe will be the easiest contributor to identify and fix. Not so easy will be identifying that the daily activities of you and your family are causing a build up of humidity which is then collecting below the floor. The indicator that this is happening could be a mysterious recurring growth of mold or mildew.
It may be necessary to reassess how the water runs in the garden directly outside the basement. If the water is not running off away from the house it is possible that it is soaking into the ground and on into the basement through the walls. In this case it will be necessary to put in additional external drainage to move the water away from the house.
Lowering Humidity In the House
There are a number of ways to fix the humidity in your basement. Firstly, install ventilation fans in your kitchen and bathroom if they don’t already have them. These two rooms are the most humid of any other room in the house.
If ventilation is installed already, ensure it is directing the air out of the house and that it hasn’t become blocked. If you have a clothes dryer it should be vented to the outside of the house.
A poorly operating air conditioning system can fail to remove humidity which may be a contributing factor to a build up in the basement. Call a contractor to check your system to confirm it is operating properly.
If the basement becomes damp from humidity in the warmer months it may be necessary to have a dehumidifier running in the basement. It’s best to run the dehumidifier in a closed room to stop humid air from outside the house from entering the basement.
Water Damage From A Leaking Pipe
If the water damage is noticeable on the ceiling of the basement or on the walls directly below a bathroom it may indicate that the water pipes have been damaged. In this case your best course of action is to call out a plumber.
Water damage that consists of considerable mold growth can best be solved by calling a professional who specializes in mold remediation.
Naturally, the most certain way to solve a problem with water in the basement is to call out a reputable water damage restoration expert. Water restoration professionals are equipped to locate the cause of any moisture as well as being experienced in repairing damaged walls or ceilings and preventing water damage in the future.
Cleaning Mold From the Ceiling
Mold thrives in any moist, warm environment with rooms such as bathrooms or kitchens a perfect place for it to grow and spread quickly. It is not only unsightly but can become a health risk as it spreads by releasing spores and these spores can affect breathing. Mold will grow on any organic material and, given the right conditions will do just as well on non-organic material.
A danger for your home when you’ve got mold growing in one or many rooms is that it actually consumes the object that it is living on and can release an acid that will permanently mark the wall or ceiling. Whether your ceiling is made from ceiling tiles, sheet rock or wood, mold is just as likely to begin growing with rooms that are often moist, such as the bathroom, the most susceptible.
Black mold is the most common type of mold that will grow on the ceiling and it can be identified as black spots of varying sizes dotting the ceiling in clusters.
Cleaning a Mold Damaged Ceiling
It is important to appreciate the danger mold poses to your health, so before you start cleaning the mold from the ceiling, ensure you have taken necessary safety precautions and have put on gloves, goggles and a face mask.
In the room you will be cleaning, close off any accesses to other parts of the house such as doors or vents. Open the window to allow the room to dry out.
An initial wash of the ceiling with a mild detergent and warm water will start the cleaning process. A quarter of a cup of bleach mixed with a quart of water can be used to follow the clean up and, if necessary, can be repeated after allowing the first application has dried. After the second application the ceiling should be allowed to dry out completely.
There are alternative products available to the bleach solution mentioned above that will remove the topical mold and also kill the remaining spores. It might be worth seeking out one of these products to be comfortable that you have thoroughly cleaned the room.
To safeguard against the return of mold in the room, all water leaks should be repaired so the environment isn’t constantly moist. If there are no leaks, it might simply be necessary to introduce more ventilation into the room. Finally, a regular clean of the bathroom to remove or kill and stray mold spores should be carried out regularly.
Make sure that if you are going to be painting the ceiling you have completely removed the mold. Painting over mold will not solve the problem and the mold will simply return in full force. It is possible to buy paint with mold prevention chemicals already mixed into it. I have actually painted such a product on the ceiling of my bathroom and have never had a problem with mold in that room.
This mold damage clean up advice assumes that the mold damage is not too extensive and that you can tackle the job yourself. If, however, the mold damage has become completely out of control, it may be necessary to call in a professional who specializes in this kind of damage clean up.
Other mold damage articles:
Prevent Mold From Taking Hold In the Home
Restoring the Home From Mold Damage
Repair Mold Damage In Books
Mold Detection and Treatment of Clothes
A danger for your home when you’ve got mold growing in one or many rooms is that it actually consumes the object that it is living on and can release an acid that will permanently mark the wall or ceiling. Whether your ceiling is made from ceiling tiles, sheet rock or wood, mold is just as likely to begin growing with rooms that are often moist, such as the bathroom, the most susceptible.
Black mold is the most common type of mold that will grow on the ceiling and it can be identified as black spots of varying sizes dotting the ceiling in clusters.
Cleaning a Mold Damaged Ceiling
It is important to appreciate the danger mold poses to your health, so before you start cleaning the mold from the ceiling, ensure you have taken necessary safety precautions and have put on gloves, goggles and a face mask.
In the room you will be cleaning, close off any accesses to other parts of the house such as doors or vents. Open the window to allow the room to dry out.
An initial wash of the ceiling with a mild detergent and warm water will start the cleaning process. A quarter of a cup of bleach mixed with a quart of water can be used to follow the clean up and, if necessary, can be repeated after allowing the first application has dried. After the second application the ceiling should be allowed to dry out completely.
There are alternative products available to the bleach solution mentioned above that will remove the topical mold and also kill the remaining spores. It might be worth seeking out one of these products to be comfortable that you have thoroughly cleaned the room.
To safeguard against the return of mold in the room, all water leaks should be repaired so the environment isn’t constantly moist. If there are no leaks, it might simply be necessary to introduce more ventilation into the room. Finally, a regular clean of the bathroom to remove or kill and stray mold spores should be carried out regularly.
Make sure that if you are going to be painting the ceiling you have completely removed the mold. Painting over mold will not solve the problem and the mold will simply return in full force. It is possible to buy paint with mold prevention chemicals already mixed into it. I have actually painted such a product on the ceiling of my bathroom and have never had a problem with mold in that room.
This mold damage clean up advice assumes that the mold damage is not too extensive and that you can tackle the job yourself. If, however, the mold damage has become completely out of control, it may be necessary to call in a professional who specializes in this kind of damage clean up.
Other mold damage articles:
Prevent Mold From Taking Hold In the Home
Restoring the Home From Mold Damage
Repair Mold Damage In Books
Mold Detection and Treatment of Clothes
Labels:
mold damage,
mold restoration
Mold Detection and Treatment of Clothes
Mold is the common term used to describe a downy or furry growth on the surface or organic matter, caused by fungi, especially in the presence of dampness and decay. These microorganisms feed on living organisms or dead organic matter.
In order to prevent the growth or spread of mold growth you have to deny the spores the moisture content they need to germinate.
The mold microorganisms need organic materials for the nutrients to grow and so, any material that was once living, including wood, paper, clothes such as cotton, linen and leather are susceptible. It doesn’t really stop there, either. Inorganic materials such as some plastics can also come under attack from fungal growth.
You need to get rid of mold because it will permanently damage the materials upon which it is growing. It will stain textiles as well as structurally weaken them, paper will be stained with spots known in the industry as “foxing” and leather will be permanently marked. Inorganic materials can be etched by organic acids produced by the fungus as a by-product of their presence.
Removing Mold From Your Clothes
The ideal scenario is that you catch the onset of mold growth early on in its life. As soon as that moldy smell becomes noticeable from the cupboard it is essential to pull all the clothes out and closely examine them for signs of mold. Remember, mold will cause deterioration in the material that it is growing on so the longer you leave it, the more chance your clothes will not be salvageable.
When the mold has been identified there are some steps you can take to remove both the mold and the mold smell.
Firstly, when you deal with mold you should use gloves and a protective mask or goggles. Take the clothes outside and then brush the loose mold growth off each item. When transporting the affected clothes you should be careful not to disturb the mold because you don’t want to spread mold spores through the house.
After the clothes have been brushed off, leave them in the sun to dry so that the heat from the sun will kill any remaining mold that is still in the clothes.
It may be necessary to wash the affected areas in a weak bleach solution although if you’re dealing with colored clothing you may want to substitute the bleach for a lemon juice and salt combination. After the clothes have been given a thorough clean with these disinfectants, they should be laundered as you would normally do and then put out to dry in the sun. Ensure that the drying process is completed to avoid a regrowth of mold.
A fungicide spray can be used on the clothes to remove any trace mold odor that may persist. Care must be taken with respect to the different materials that you are trying to remove the mold from. Materials such as silk, nylon and wool can be damaged when applied with chlorine bleach.
A product such as Moldergent, which is a 100% organic mold cleaning detergent, can be used in the laundering process. This type of product has been specially formulated to remove mold and mildew from clothes.
As mentioned earlier in the article, at the first sign that the clothes in your wardrobe have been affected start the mold restoration process immediately. The process is not too burdensome and the longer you delay cleaning and drying your clothes the more chance that they will be ruined beyond repair.
In order to prevent the growth or spread of mold growth you have to deny the spores the moisture content they need to germinate.
The mold microorganisms need organic materials for the nutrients to grow and so, any material that was once living, including wood, paper, clothes such as cotton, linen and leather are susceptible. It doesn’t really stop there, either. Inorganic materials such as some plastics can also come under attack from fungal growth.
You need to get rid of mold because it will permanently damage the materials upon which it is growing. It will stain textiles as well as structurally weaken them, paper will be stained with spots known in the industry as “foxing” and leather will be permanently marked. Inorganic materials can be etched by organic acids produced by the fungus as a by-product of their presence.
Removing Mold From Your Clothes
The ideal scenario is that you catch the onset of mold growth early on in its life. As soon as that moldy smell becomes noticeable from the cupboard it is essential to pull all the clothes out and closely examine them for signs of mold. Remember, mold will cause deterioration in the material that it is growing on so the longer you leave it, the more chance your clothes will not be salvageable.
When the mold has been identified there are some steps you can take to remove both the mold and the mold smell.
Firstly, when you deal with mold you should use gloves and a protective mask or goggles. Take the clothes outside and then brush the loose mold growth off each item. When transporting the affected clothes you should be careful not to disturb the mold because you don’t want to spread mold spores through the house.
After the clothes have been brushed off, leave them in the sun to dry so that the heat from the sun will kill any remaining mold that is still in the clothes.
It may be necessary to wash the affected areas in a weak bleach solution although if you’re dealing with colored clothing you may want to substitute the bleach for a lemon juice and salt combination. After the clothes have been given a thorough clean with these disinfectants, they should be laundered as you would normally do and then put out to dry in the sun. Ensure that the drying process is completed to avoid a regrowth of mold.
A fungicide spray can be used on the clothes to remove any trace mold odor that may persist. Care must be taken with respect to the different materials that you are trying to remove the mold from. Materials such as silk, nylon and wool can be damaged when applied with chlorine bleach.
A product such as Moldergent, which is a 100% organic mold cleaning detergent, can be used in the laundering process. This type of product has been specially formulated to remove mold and mildew from clothes.
As mentioned earlier in the article, at the first sign that the clothes in your wardrobe have been affected start the mold restoration process immediately. The process is not too burdensome and the longer you delay cleaning and drying your clothes the more chance that they will be ruined beyond repair.
Labels:
mold damage,
mold restoration
Repair Mold Damage In Books
If you’ve suffered water damage and one of the items are your books, there are some necessary steps that you will have to take if you want to prevent mold from growing on them.
You first have to work out which books have suffered little enough damage to be saved. For those books that are completely ruined by water, or which are not valuable enough to save, discard them immediately. For those books that contain valuable information that you think you will want at a later date, photocopy the pages and then discard the originals. For those books that you will want to save, freeze the books. Mold cannot grow when it has been frozen.
Air-drying the books may be an option, but do so following these stops:
Repair Mold Damaged Books
If you have not moved quickly enough to prevent mold damage in the first place, or if the books have been stored in a damp environment and have become mold damaged over time, there are some steps available to you to perform mold damage restoration.
Mold damage on the cover or spine of the book can be addressed by removing the cover of the book and retaining the pages within. If the mold is heavy but has only affected the dustjacket then your restoration may simply be a matter of removing the jacket and discarding it. You will have to do a thorough inspection of the inner pages of the book to ensure that the pages have not also become mold damaged. If you hate the thought of coverless books in your bookshelves, you may have to decide on getting the books professionally rebound.
If the mold damage on the cover is only light, you will have to remove the mold by first brushing the mold from the cover. You will then be required to sponge the cover down with a water, bleach and detergent mix. The idea is to destroy the mold spores that may be left behind, so after washing down the cover, leave the book out in the sun to completely dry.
The more difficult mold restoration of books comes when dealing with mold on the inside pages of the book. It is very likely that books with mold damage on the pages will not be salvageable but there are some steps to take to try.
Firstly, brush off any visible mold. Follow this up with a light sponge with the water, bleach and detergent mixture over the contaminated area remaining very careful not to wet the pages too much. Leave the washed books out in the sun, pages open, so that they might dry out completely. This process should be completed page by page as necessary.
Whether or not you want to tackle this kind of mold damage restoration will depend on how valuable the books that are damaged are and how badly you need the content contained within.
As with all mold repair work you should be aware of the safety issues involved and make sure you have equipped yourself with the proper personal protection equipment.
You first have to work out which books have suffered little enough damage to be saved. For those books that are completely ruined by water, or which are not valuable enough to save, discard them immediately. For those books that contain valuable information that you think you will want at a later date, photocopy the pages and then discard the originals. For those books that you will want to save, freeze the books. Mold cannot grow when it has been frozen.
Air-drying the books may be an option, but do so following these stops:
- Fan books open and stand on top or bottom edge; never stand them on the front edge.
- Stand books on driest edge first to provide support. As the book dries turn it upside-down to the opposite edge every few hours.
Place a sheet of waxed paper larger than the pages between the front and back cover and adjacent page before standing on edges. Replace the interleaving as it becomes saturated.
When the book is no longer wet, but still cool to the touch, close and place on a solid surface with a slight weight to keep distortion to a minimum. Check frequently to ensure that no mold is growing.
Repair Mold Damaged Books
If you have not moved quickly enough to prevent mold damage in the first place, or if the books have been stored in a damp environment and have become mold damaged over time, there are some steps available to you to perform mold damage restoration.Mold damage on the cover or spine of the book can be addressed by removing the cover of the book and retaining the pages within. If the mold is heavy but has only affected the dustjacket then your restoration may simply be a matter of removing the jacket and discarding it. You will have to do a thorough inspection of the inner pages of the book to ensure that the pages have not also become mold damaged. If you hate the thought of coverless books in your bookshelves, you may have to decide on getting the books professionally rebound.
If the mold damage on the cover is only light, you will have to remove the mold by first brushing the mold from the cover. You will then be required to sponge the cover down with a water, bleach and detergent mix. The idea is to destroy the mold spores that may be left behind, so after washing down the cover, leave the book out in the sun to completely dry.
The more difficult mold restoration of books comes when dealing with mold on the inside pages of the book. It is very likely that books with mold damage on the pages will not be salvageable but there are some steps to take to try.
Firstly, brush off any visible mold. Follow this up with a light sponge with the water, bleach and detergent mixture over the contaminated area remaining very careful not to wet the pages too much. Leave the washed books out in the sun, pages open, so that they might dry out completely. This process should be completed page by page as necessary.
Whether or not you want to tackle this kind of mold damage restoration will depend on how valuable the books that are damaged are and how badly you need the content contained within.
As with all mold repair work you should be aware of the safety issues involved and make sure you have equipped yourself with the proper personal protection equipment.
Subscribe to:
Posts (Atom)