Hardwood Floor Water Damage

Repairing water damage on a hardwood floor is a task that may be necessary from time to time on a small scale with intermittent spillages or minor leaks. Alternatively you may be faced with major water damage following flood or a large body of water that has saturated your hardwood floorboards.

Repairing Minor Hardwood Floor Water Damage

If you have discovered a minor leak that has allowed water to seep onto your hardwood floorboards, there may be a single spot that has become damp and discoloured compared to the rest of your floor. In this case there are some simple steps that you can take to repair the hardwood floor water damage.

Firstly, make sure you have identified the source of the water damage and fixed it completely. Any later repair work will be for nothing if you do not seal the leak or repair the pipes from where the water is coming.

Next, you may be faced with a spot that is discoloured and possibly swollen and cracked. The wood grain has become affected by the water damage and has reacted. Dry out the affected area until it is completely dry before beginning any restoration work on it.

Begin by sanding back the affected area starting with a coarse sandpaper before moving back to a finer grit. Once the area has been sanded back and the stain edges are smooth treat the area with a wood sealant that matches the rest of the floor. Following one coat of sealant it may be necessary to sand it back before adding another coat.

Some kind of blending process may have to be done so that the damaged area winds up looking the same as the original floor.

Major Hardwood Floor Water Damage Repair

When a lot of moisture has been absorbed by a hardwood floor the most common result is that the wood expands. When the boards expand they become wider and one of two things might happen, you might have a buckled floor or you may have a floor that is cupped. In either case you are left with a seriously uneven floor.

In order to restore the water damaged hardwood floor without having to pull up the entire floor and replace it you can use a process known as
desiccant dehumidification. This is carried out by bringing in a desiccant dehumidifier which if very effective at reducing the humidity level in the air. The desiccant dehumidifier can be run under sealed conditions to completely remove the moisture from the area. In this case you are removing moisture from the floorboards.

Running a dehumidifier for an extended period will help to reduce the swollen floorboards and counteract the cupping or buckling that has taken place. As the moisture is drawn out of the air it will also be drawn out of the hardwood floorboards and they will shrink back to their normal size. Effectively you want the top surface of the floorboards and the bottom surface to be balanced in moisture content.


An illustration of a cupped wood floor
Once the floor has been properly dried and the moisture is removed from the surrounding area, the floor can be sanded back and refinished so that it is returned to its original smoothness again.
If the hardwood floor has become so buckled that it has come completely away from the subfloor to which it was attached it may be necessary to call in a hardwood floor installer to reattach the planks.

In all cases when dealing with repairing hardwood floor water damage the key to a successful restoration is to completely remove the moisture that caused the original damage in the first place. No matter how carefully you carry out your restoration, if you haven’t fixed the origin of the water the problem will return and cost you even more of both your time and money.
Here are some more water damage restoration articles

Drywall Water Damage

The way you deal with water damage to your drywall walls will depend largely on a number of different factors. The first thing that must be determined is the amount of water involved in the damage, the more water damage there is affecting the drywall the greater will be the repair required.

The sort of water involved in the drywall water damage will also play a big part in the action you will be required to take. There are three standards that measure the cleanliness of the water that has invaded your home: black, grey and clear.

Black water is highly polluted water, usually involving sewage contamination but can also contain pesticides or toxic organic substances. If your drywall is affected by black water you will have to completely replace the wall and very likely the supporting structure underneath as well.

Gray water can carry microorganisms that are harmful to the health, possibly causing illness. Gray water may come from dishwashers, washing machines or sump pump failures. Walls that are affected by gray water can be treated without having to resort to complete wall removal.

Clear water damage usually originates from leaky pipes, rainwater or sink overflows that do not contain contaminates. Drywall water damage that involves clear water can be treated without having to remove the drywall.

Drywall Water Damage Repair

Drywall that has been affected by water damage will become quite noticeable very quickly because the paper backing tends to bubble or wrinkle. It should be repaired after first identifying the cause of the initial water damage. There’s no point in repairing a water damaged drywall without fixing the source of the leak because within a month or two you’ll find yourself back exactly where you started.

If the water damage is not extensive you should simply cut out the affected area of drywall in a square or rectangle shape. Neatness counts at this point because you are going to be replacing the damaged drywall with a new piece.

Once the water damaged drywall piece is removed check the wall cavity for signs of water or, if there is insulation in the wall, test the insulation to see if it is wet. If the insulation proves to be wet, you will have to remove and replace the insulation as well, which may require a larger hole.

Once you have satisfied yourself that the wall cavity is dry, cut a replacement piece of drywall so that it is a snug fit. It may be necessary to install a backing piece if timber behind the drywall hole, screwing it to existing studs to support the new piece. Secure the new piece of drywall in place and tape the seams applying plenty of plaster over the top. Allow the plaster to dry before sanding back and finishing it to match the rest of the wall.

More Water Damage Articles

Basement Water Damage
Deodorize A Water Damaged Carpet
Repair A Water Damaged Carpet
Conduct Your Own Water Damage Restoration

Odor Removal

The aftermath of a fire regardless of its size will always have one particular kind of result. Fire damage smell will always be a distinctive result of a fire thanks to the smoke that soaks into every crack and crevice that it comes in contact with. One aspect that will feature prominent in any home restoration, whether it’s a fire restoration or a water restoration, is the need to remove odor from the living space. Odor can arise from many origins such as smoke odor after a fire or a damp mildew odor following a flood. Following a disaster there may be contaminates brought in from outside.

No matter what the kind of odor removal is required, there are some basic principles that will be involved:

1. Remove the source of the odor.
2. Clean the affected surface or material.
3. Treat the surface with a penetrating counteractant.
4. Seal the surface that is being restored if possible.

When there is an odor coming from the carpet it’s a pretty good be that it signals the presence of mold or mildew in the carpet. When the carpet has become wet for one reason or another, such as not being properly dried after washing, the organisms can grow. There are a few simple solutions that can be tried using common household products to remove mold or urine odors from the carpet.

Baking soda is a very popular substance for use in removing odor. The reason why baking soda works is that it is composed of sodium carbonate and it’s this that actively eliminates the odors. White vinegar is another effective odor eliminator through the acidic nature which will kill the bacteria as it contacts it. Similarly lemon will work in much the same way as vinegar. The acid content of lemon will help to counteract the odor in a carpet.

These three products are also simple but effective methods of removing most pet odors from the house, including the odor of urine. Baking soda mixed with water and sprayed over a urine stain will neutralize the odor and will play a big part in cleaning the stain.

Smoke odor removal is another matter altogether. In this case we will talk about cleaning smoke odor following a house fire. During a fire the smoke particles tend to permeate all hard and soft surfaces, moving into the objects themselves where they are trapped, giving off a constant smoky odor long after the rest of the damage has been cleaned up.

To remove the smoke odor you have a number of options at your disposal. Firstly you will need to air out the room as completely as possible to remove as much of the residual smell as you can. It may be necessary to carry out a thermal fogging procedure which will send in purifying mist into the pores of the surfaces affected by the smoke, neutralizing the odor.

Alternatively, you might try using an Ionic Air Purifier which will work constantly to trap and remove odors from the room while releasing purified air back into the room. Some of these air purifiers feature a high-efficiency particle filter (HEPA) which is a very effective filter to use on solid particles.

No matter what kind of odor is plaguing your home, there is usually a simple and effective method for counter-acting it. Usually it is not necessary to go out and spend a lot of money on expensive wonder chemicals that claim to clean and freshen.

Finding Disaster Restoration Companies

Disaster Restoration
Any building that has suffered structural damage from outside elements, whether natural or otherwise will require some kind of restoration work. When the disaster that has struck the home is something like flood, hurricane or other water damage the need for a disaster restoration is more urgent. Ideally there should be steps taken to begin drying out the rooms within the first 48 hours.

The quickest and safest way to get the job done is to call in disaster restoration experts.

It can be difficult to work out who is the best qualified to do the job for you, with any number of shonky operators willing to take advantage of victims of water damage. There are some qualifications that you should look for when seeking a disaster restoration contractor.
  • Your insurance company will have a reliable list of contractors to choose from. Seek their help in selecting someone well qualified.
  • It’s always a good idea to check out the potential contractor with the Better Business Bureau.
  • Disaster restoration experts who are certified by reputable trade organizations such as the IICRC (Institute of Inspection, Cleaning and Restoration Certification) or RIA (Restoration Industry Association).
  • Make sure the person you are hiring is insured, licensed and bonded.

The main thing that you’ve got to look for is a well organized company that will take control of the disaster restoration for you. They should be able to offer a complete plan of action including the removal and storage of any belongings that may be salvageable, dealing with the insurance company and offer alternatives on what can be saved and what can’t.

They will be required with all aspects of disaster recovery including the complete property damage restoration. In the case of a flood or major water damage there will be the need to be able to deal with water damage restoration involving the associated problems of water damage carpet cleaning, carpet repair and carpet restoration. They will also have to provide knowledge of furniture restoration such as how to deal with a water damaged couch, rug or table. As well as restoring or repairing the furniture that was damaged in the flood, your disaster restoration contractors will have to be able to perform a complete water extraction that will remove all trace of water, vital if there is to be no later problems with mold and mildew.

On the other side of the disaster scale will be a disaster involving fire. The restoration knowledge will be a little different with expertise required in smoke damage cleanup and removal, smoke damage repair and smoke odor removal.

These days with modern technology making its way well and truly into the family home, there will also be a need for a disaster restoration contractor to be able to perform a full electronics restoration. This may include a data recovery on your computer and the security system if it is integrated into the home. Not all services can provide these features so it is important to find this out first.

It will be important that the disaster restoration contractors are able to secure your premises while they are working on your home. In cases or flood or fire, it may be difficult to secure the home so the contractors should be able to provide you with a solution to deal with the problem.

Fire and water damage repair is a specialized field that requires specific attention to detail and professional knowledge. Make sure you take the necessary care in finding a disaster restoration expert who is up to the task to ensure that your misery is not extended to the cleanup.

More advice about disaster restoration companies is available at:

Fire and Water Damage Restoration Services